The Office Will Be Closing at 1:30PM Today for Our Annual Company BBQ
Corner Units
- Corner details are one of the areas that are difficult to seal correctly and we would suggest to use the Preformed Corners
- Preformed Corners are sealed in place by either welding or taping to form a gas tight seal.
Stanchions
- Dress the Stanchions with Protech GM Self Adhesive Flashing
- Apply 2 coats of Protech Bitumen Primer prior to the area to be covered by the Protech GM Flashing
- Ensure that the Protech GM Flashing is overlapped onto the Protech Gas Membrane
Pipe Penetrations
- Pipes can be sealed with the use of our Preformed Protech GM Tophats.
- Ensure that the release paper of the Protech GM Tape is removed completed once the Protech GM Tophat is in place to ensure a good seal.
- Best practice is to weld into position.
- Use a strip of Protech GM 150mm Flashing to the top of the Protech GM Tophat rather than using a Jubilee Clip as this can create distortion to the pipe.